- Options > Screen/Keyboard > Backlight Brightness -> (set to no higher than 50) --My setting: 10-- (effect = high)
- Options > Screen/Keyboard > Auto Dim Backlight -> this setting also brightens the backlight automatically beyond the above setting. Therefore, set above to as low as possible and enable this setting which will auto brighten when needed.
- Options > Screen/Keyboard > Backlight timeout -> Set to 30 seconds or lower --My setting 20sec-- (effect = medium)
- Options > Screen/Keyboard > LED coverage indicator -> set to off. (effect = low)
- Options > Screen/Keyboard > Key tone -> set to off (effect = low)
- Options > Screen/Keyboard > Audible roll -> set to off (effect = low)
- Profiles > Advanced > (Active) > If vibrate feature is used for phone, sms, IM's BBM's etc. Set Number of Vibrations to no more than 2 and for best battery life 1. (effect = high)
- Repeat step 6 for Number of Beeps (e.g set to 1 and set volume to high or set as 2 and set volume to medium...) (effect = medium)
- Profiles > Advanced > (Active) -> Set all Out of Holster profiles are set to Tone only. As much as possible avoid using vibrate or vibrate+tone for Out of holster. Here is were you'll need to enable repeat notification/LED flashing. (effect = high)
- Profiles > Advanced > (Active) > Repeat Notification -> For those who use a hip-mounted holster set LED flashing to None under the In holster profile. (effect = medium)
ที่มา: pinstack.com
0 ความคิดเห็น:
แสดงความคิดเห็น